MTS DINO SERIES: Applications
THE MOST VERSATILE TOOL IN SAFE DIGGING.
Get positioned at the front of your industry with the advanced technology of suction excavation.
The MTS dino series suction excavators are the solution for contaminated sites where soft digging is required. With hydrostatic drive, and the ability to side tip, all units can be emptied on site or into bins in minutes. In the site pictured, the DINO 12 excavated over 40 yards of material in 6 hours. The site had a mix of granular “A” gravel and pee stone, and all material was separated and stored on site. Upon completion of the work, the contractor was able to reuse the fill, eliminating the high costs of disposal, and the need to bring in new fill.
The MTS dino series suction excavator is capable in removing all types of particulate roofing material ranging from pee-stone type roof ballast, to green roofing systems. The suction excavator generates over 24,000 cfm of suction power meaning that high volumes of material can be removed very quickly. Every unit is equipped with twin air compressors generating 320 cfm @ 116 p.s.i., allowing operators to use an airspade to clean the roof and keep everything dry and workable. All material removed can be dumped into roll off bins, allowing the equipment to stay on site and be
productive all day.
The MTS dino series suction excavator is capable in all types of pipeline applications. Often pipeline work is off the beaten path leading to the challenges of filling your vac up with water and limited dump sites. The material in pumping stations and along pipeline routes is regularly suspect and often requires testing, leading to high costs for disposal. With the suction excavator, no water is required, and work can continue all day. One of OX’s customers works in a gas pumping station and was required to excavate large areas around a 4’ gas main. On this project, they were able to average between 50-80 yards excavated a day, all while lowering the cost of disposal for the client by dumping on site.
The MTS dino series suction excavator is capable in removing all types of particulate roofing material ranging from pee-stone type roof ballast, to green roofing systems. The suction excavator generates over 24,000 cfm of suction power meaning that high volumes of material can be removed very quickly. Every unit is equipped with twin air compressors generating 320 cfm @ 116 p.s.i., allowing operators to use an airspade to clean the roof and keep everything dry and workable. All material removed can be dumped into roll off bins, allowing the equipment to stay on site and be
productive all day.
The MTS dino series suction excavator is the vacuum truck of choice for all types of industrial work. Often the material being pulled in industrial sites is contaminated and cannot be dumped at most common disposal facilities. With the suction excavator, material’s excavated, can often be dumped on site or into bins stored onsite. This means that the truck doesn’t leave site all day, and there are more options for cost-effective disposal solutions. Each suction excavator is fitted with 42 self cleaning conical filters, meaning that even the finest of industrial products can be vacuumed all day. With 24,000 cfm of suction power, the truck achieves incredible levels of production, getting you or your customers plant back up and running quicker. productive all day.
The MTS dino series suction excavator is the ideal vacuum excavator when working in the congested core of a city. Often getting in and out of a major city is a challenge due to traffic congestion on city streets. To make this worse, traditional hydrovacs are often full midday, meaning that they are forced to head into city traffic to somewhere outside the city where they can dispose of the excavated material. Once the suction excavator is on site, you can expect it to stay on site all day, dumping on site or into a bin, eliminating road time and lost productivity. On a recent project, a Dino 4.5 was able to excavate 24 yards of material, dumping all fill on site for reuse, not leaving site once.
The MTS dino series suction excavator is capable in removing all types of particulate roofing material ranging from pee-stone type roof ballast, to green roofing systems. The suction excavator generates over 24,000 cfm of suction power meaning that high volumes of material can be removed very quickly. Every unit is equipped with twin air compressors generating 320 cfm @ 116 p.s.i., allowing operators to use an airspade to clean the roof and keep everything dry and workable. All material removed can be dumped into roll off bins, allowing the equipment to stay on site and be
productive all day.
The MTS Dino series suction excavator is capable and ideal for all excavations in areas where tree protection is critical and mandated. Each suction excavator is equipped with an airspade for safe pneumatic digging around utilities and tree root layers. The Airspade is the tool of choice for arborists when excavating in tree protection zones and is ideal for preserving root health. Often hydrovacs are forced to turn down their waters P.S.I output when digging around roots, drastically decreasing production, however with the airspade, operators can run the tool at full pressure. Digging dry allows operators to fill the excavation with the same soil that was vacuumed and this is of benefit to the tree’s health.